Stranded for the first time, 2014 SR 11.4

I apologize in advance for the length but I feel that its better to be overly descriptive whenever an issue arises Here's what happened: A group of motorcycles from my area (all  ICE except for mine) decided to gather for a group ride. Since I hadn't… Go to Source

10T / 65T sprockets & chain protection

My 12T front sprocket was absolute toast and the 71T rear sprocket a mistake, so I tried something different this time.  I was looking for max torque using the Zero rear sprocket, which is ultra-light and readily available.  As others here have noted, … Go to Source

Help needed: Kickstand "bent"

Hi A couple of days ago, I had the unfortunatel experience that I tipped over the left side of my zero when I mounted from the left side. The reason was that the ground was a very small amount slopy to the left and forward (but not too much, so the bik… Go to Source

First motor timing and commissioning at AF-1 racing in Austin TX

Hey all, I missed my first inspection at the zero dealer by a whopping 700 miles. Oh well… it is a simple encoder alignment (Timing) of the electrical angle kind and a couple of firmware updates. But, … Go to Source

2014 Empulse $1000

950 miles on my 2014 Brammo Impulse and clutch has stopped working (will not engage).  Worked fine last time I rode the bike about a month ago.  Have bled the system several times (using a speed bleeder) but still no clutch action, – suspect a problem … Go to Source

Clutch Switch and Hella Plug

Just fooling around with the bike and found a couple of things. Under the top cover on the left side of the bike there is a "Hella plug".  It is wired for 12 volts and looks liked it is fused for 10 amps.  If you don't what it is, BMW and some others u… Go ...

Victory Service Manual

I like to work on my own stuff and my Victory Empulse is no different than anything else I own.  Until I got the Victory service manual PN 9926260 R01 I had been using the Brammo manual (courtesy of the forum Wiki—thanks).  This manual is a lot more … Go to Source

Charging behaviour with chargetank

I had my chargetank installed last summer, but I never made a full charge through the charge tank until February. I charged my SR with my Chevy-Volt wallcharger. After the charge I realised that both the display and charging indicator were dark. I chec… Go to Source

Charging behaviour with chargetank

I had my chargetank installed last summer, but I never made a full charge through the charge tank until February. I charged my SR with my Chevy-Volt wallcharger. After the charge I realised that both the display and charging indicator were dark. I chec… Go to Source

Footpegs on Zero S/SR

Anybody knows at what angle the footpegs on the S/SR start hitting the ground? Has anybody changed the footpegs? Position or height? Go to Source